
A-78395E
Edit
Apprv
ApprvApprv
Apprv.
..
.Desig
DesigDesig
Desig.
..
.
Sheet
Title
Draw
No.
13/75
Date
DateDate
Date
Design
DesignDesign
Design
Descri
tion
Descri
tionDescri
tion
Descri
tion
Date
DateDate
Date
FANUC Series 16
i
/18
i
-TA/TB
Specifications of High-Precision Contour
Control forComplex Lathe
2001.02.14 A.Fukumoto
02 2001.10.04
Description of Cs axis and rotary axis are added.
N1
N2
N3 N4
N5
N6
N7
N8
N17
N16
N14
N13
N11
N12
N15
N10
N9
Linear interpolation
Interpolated by smooth curve
Linear interpolation
Interpolated by smooth curve
N1
N2
N3 N4
N5
N6
N7
N8
N17
N16
N14
N13
N11
N12
N15
N10
N9
Smooth interpolation
Fig. 1.3.3 (c) Smooth Interpolation and Linear Interpolation
•
••
•
Conditions for performing smooth interpolation
Smooth interpolation is performed when all the following conditions are satisfied. If any of
the following conditions is not satisfied for a block, that block is executed without smooth
interpolation then the conditions are checked for the next block.
(1) The length of the block is shorter than that of the parameter No.8486, and it is longer
than the parameter No.8490.
(2) The difference between the angles specified in blocks is smaller than the value specified
with parameter No.8487.
(3) The tolerance specified in the block is smaller than the value specified with parameter
No. 7676 and larger than that specified with parameter No.8492.
(4) The modes are:
G01 : Linear interpolation
G05 P10000 : HPCC mode
G40 :
Cutter compensation cancel
G94 : Feed per minute
(5) Machining is specified only along the axes specified with G05.1Q2.
(6) The internal algorithm of the CNC judges the block to be suitable for smooth
interpolation.
•
••
•
Commands which cancel smooth interpolation
When one of the following commands is specified, smooth interpolation is canceled:
(1) Auxiliary and second auxiliary functions
(2) M98,M99 : Subprogram call
M198 : Calling a subprogram in external memory