1. Fanuc
  2. Change of Design on the 15.0

Change of Design on the 15.0 Additional Manual Page 1

Additional Manual
TECHNICAL REPORT (MANUAL) ＮＯ．ＴＭＮ ０４／ 115E
Date Nov. 19, 2004
General Manager of
CNC Laboratory
PANEL i , FS30i/300is series
Change of design on 15.0” LCD units
１．Communicate this report to:
○ Your information only
○ GE Fanuc-N, GE Fanuc-E
FANUC Robotics
CINCINNATI MILACRON
○ Machine tool builder
Sales agency
○ End user
２．Summary for Sales Documents
３．Notice
４．Attached Document
Drawing
No.
A-85120E
Original section of issue
V. G. M. Department
Manager
Section
Manager
Person in
Charge
ＦＡＮＵＣ
ADE
Previous page
Next page

Contents Summary of Change of Design on the 15.0 Additional Manual

  • Page 1TECHNICAL REPORT (MANUAL) ＮＯ．ＴＭＮ ０４／ 115E Date Nov. 19, 2004 General Manager of CNC Laboratory PANEL i , FS30i/300is series Change of design on 15.0” LCD units １．Communicate this report to: ○ Your information only ○ GE Fanuc-N, GE Fanuc-E FANUC Robotics CINCINNATI MILACRON ○ Machine tool builder Sal
  • Page 2Change of design on the 15.0” LCD units Abstract In 15.0” LCD units for PANEL i , FS30i/300is series, FANUC will apply the new 15.0” LCD units to systems provided from December 2004. It is caused the production stoppage by LCD manufacturer. The new 15.0” LCD units have fully compatibility with curre
  • Page 3A08B-0084-B403 A08B-0084-D403 A08B-0084-D423 A13B-0196-B403 A08B-0084-B423 A13B-0196-B423 A08B-0084-B410 A08B-0084-D410 A08B-0084-D430 A13B-0196-B410 A08B-0084-B411 A08B-0084-D411 A08B-0084-D431 A13B-0196-B411 A08B-0084-B412 A08B-0084-D412 A08B-0084-D432 A13B-0196-B412 A08B-0084-B432 A13B-0196-B432