Concerning shifting Super CAP II M to Super CAPi M (A-63628E) Additional Manual Page 2
Additional Manual
01 98.06.24 New-registered
A-63628E
ED DATE DESIG.
DESCRIPTION
1/1
CUST.
SHEET
TITLE
DRAW.NO.
Concerning shifting
Super CAP II M
to Super CAPi M
Concerning shifting Super CAP II M to Super CAPi M (Information)
Current FS16
i
/18
i
-MA Super CAP II M was shifted to new FS16
i
/18
i
/21
i
-MA Super CAP
i
M, since April 1998.
However, please be careful because the rule of an order is different between Super CAP
i
M
and Super CAP II M as follows.
Super CAP
i
M (New) Super CAP II M (Current)
Drawing No.
(Macro Library)
A08B-9001-J800#ZZ07 A08B-9001-J669#ZZ07
Drawing No.
(Additional Option)
A02B-????-J768
???? = 0237 : for FS16
i
-MA
0239 : for FS18
i
-MA
0248 : for FS21
i
-MA
A02B-????-J898
???? = 0237 : for FS16
i
-MA
0239 : for FS18
i
-MA
Note1) Super CAPi M has a upper compatibility of Super CAP II M. In future, new
functions
are not added in Super CAP II M, but Super CAPi M.
Note2) Super CAPi M is available on FS21i-MA also.
Note3) Please install Super CAPi M to i-Series CNC with the following software.
• On and after DDF1-08 in case of FS21i-MA.
Contents Summary of Concerning shifting Super CAP II M to Super CAPi M (A-63628E) Additional Manual
- Page 1TECHNICAL REPORT ＮＯ．ＴＭＮ ９８／ Date June.24.1998 General Manager of Software Laboratory Concerning shifting Super CAP II M to Super CAPi M (Information) 1. Communicate this report to: ○ Your information ○ GE Fanuc-N, GE Fanuc-E FANUC Robotics CINCINNATI MILACRON ○ Machine tool builder Sales agency End
- Page 2Concerning shifting Super CAP II M to Super CAPi M (Information) Current FS16i/18i-MA Super CAP II M was shifted to new FS16i/18i/21i-MA Super CAPi M, since April 1998. However, please be careful because the rule of an order is different between Super CAPi M and Super CAP II M as follows. Super CAPi