Description of a Pulsecoder modification Additional Manual Page 3
Additional Manual
Draw. No.
Title
Aochi
02.10.23
01
PAGE
Description of
α
Pulsecoder
2/2
FANUC LTD.
A-56731E-0092
Description
Design
Date
Edit
.
TaniguchiTaniguchi
3. Outline
The outer dimension of α Pulsecoder installed in α servo motor is changed because
some electronic parts were discontinued and print circuit board is modified.
4. Applied Pulsecoder
αA64 : A860-0360-V501, A860-0360-V511
αA1000 : A860-0370-V501, A860-0370-V511
αI1000 : A860-0365-V501
5. Modification of outer dimension
The modified Pulsecoder is lower than
the former Pulsecoder by approx. 18mm.
Former Pulsecoder
Modified Pulsecoder
Note) The signal output of modified Pulsecoder is compatible with former Pulsecoder.
So it is not necessary to change output cable (A860-0360-V906).
Contents Summary of Description of a Pulsecoder modification Additional Manual
- Page 1TECHNICAL REPORT (MANUAL) No. TMS02/031E Date October 24 , 2002 General Manager of Servo Laboratory Description of α Pulsecoder modification 1. Distribute this report to the destinations marked with O : O Your information O GE Fanuc-N, GE Fanuc-E O Fanuc Robotics-NA, Fanuc Robotics-E CINCINNATI MILA
- Page 2Description of α Pulsecoder modification 1. Type of applied technical documents Name Description of α Pulsecoder modification Spec. No./ Version A-56731E-0092 2. Summary of change New, Add Applicable Group Name/Outline Correct, Delete date Basic Function Optional Function Unit Maintenance Parts Noti
- Page 33. Outline The outer dimension of α Pulsecoder installed in α servo motor is changed because some electronic parts were discontinued and print circuit board is modified. 4. Applied Pulsecoder αA64 : A860-0360-V501, A860-0360-V511 αA1000 : A860-0370-V501, A860-0370-V511 αI1000 : A860-0365-V501 5. Mod