FANUC Series 30i/31i-A Specifying Tilted Working Plane Executing Signal Additional Manual Page 3
Additional Manual
Ed.
App
rov.
Page
Name No.
Date
Person
Contents
Date
FANUC Series 30i
/
31i-
A
Specifying Tilted Working Plane Executing
Signal
A
-90003E
Feb.22.’05
3
/
3
FANUC LTD.
Person
1.2 Signal
Tilted working plane executing signal TWPEX<Fn0519#0>
[Classificatin] Output signal
[Function] This signal indicates that tilted working plane command is executed. Especially
at power-on, it is possible to know whether tilted working plane mode was in
progress when the power was turned off.
[Output condition] The signal is set to 1 when:
- Tilted working plane command is executed.
The signal is set to 0 when:
- G69/G69.1 command is executed.
- After tilted working plane mode is canceled by reset or power-off, when
an axis is moved.
Signal address
#7 #6 #5 #4 #3 #2 #1 #0
Fn0519 TWPEX
Contents Summary of FANUC Series 30i/31i-A Specifying Tilted Working Plane Executing Signal Additional Manual
- Page 1FANUC Series 30i/31i -A Tilted Working Plane Executing Signal Specifications FANUC Series 30i/31i-A Name Specifying Tilted Working Plane Executing Signal No. A-90003E Ed. Date Date Person Feb.22.’05 Person Contents Approv. FANUC LTD. Page 1/3
- Page 21.1 Tilted Working Plane Executing signal after Power-Off/On Overview The DO signal which signifies that tilted working plane command is executed is added. Because this signal is retained after the power is turned off, when the power is turned on again, it is possible to know whether the power is tu
- Page 31.2 Signal Tilted working plane executing signal TWPEX