1. Fanuc
  2. FS 16i/18i/21i-MB/TB, Multi-Spindle Control Type-C, Specifications

FS 16i/18i/21i-MB/TB, Multi-Spindle Control Type-C, Specifications Additional Manual Page 1

Additional Manual
1
FANUC Series 16i/18i/21i-MB/TB
MULTI-SPINDLE CONTROL TYPE-C
Specification
Edit
Apprv.
Desig.
Sheet
Title
Draw
No.
/ 5
Date
Desi
g
n
Descri
p
tion
Date
FANUC Series 16i/18i/21i-MB/TB
MULTI-SPINDLE CONTROL TYPE-C
A-79114E
03.04.04
M.Ito
Previous page
Next page

Contents Summary of FS 16i/18i/21i-MB/TB, Multi-Spindle Control Type-C, Specifications Additional Manual

  • Page 1FANUC Series 16i/18i/21i-MB/TB MULTI-SPINDLE CONTROL TYPE-C Specification FANUC Series 16i/18i/21i-MB/TB Title MULTI-SPINDLE CONTROL TYPE-C Draw No. A-79114E Edit Date Design Description Sheet 1 /5 Date 03.04.04 Desig. M.Ito Apprv.
  • Page 21. OUTLINE By this function, multi-spindle control TYPE-C is available. Multi-spindle control TYPE-C has following feature. When the spindle stop state is released by the signal *SSTPx=0->1, spindle speed is restored. For the other features, refer to “2. DESCRIPTION.” Multi-spindle control TYPE-C ne
  • Page 3Multi-spindle TYPE-C has following features and limitations. Signal description SWSx: Spindle selection signal *SSTPx: Individual spindle stop signal SINDx: Spindle motor speed command select signal SOR: Spindle orientation
  • Page 4As for the spindle rotation direction As for the spindle rotation direction, we recommend you to control CW/CCW command signal SFRx/SRVx by ladder program. In case of using other method, following notes exist. • The relation between spindle command and ro
  • Page 53. PARAMETER #7 #6 #5 #4 #3 #2 #1 #0 3713 MSC [Data type] Bit MSC Multi-spindle control TYPE-C is 0: unavailable. 1: available. Note1) When the parameter MSC and the parameter MSI(multi-spindle control TYPE-B, No.3709#2) are both “1”, multi-spindle TYPE-C becomes available. Note2) When this paramete