Available ATA Flash Cards and Compact Flash Cards with FS30i/300i/300is/31i/310i/310is/32i/320i/320is-MODEL A Additional Manual Page 3
Additional Manual
Edit.
DATE Design
Description
DRAW. NO.
A-65555E
CUST.
SHEET
2 / 2
note3
FANUC cancels the recommendation of SanDisk’s Compact Flash cards, because those which were
shipped from the end of 2003, may not work in Data Server.
Even identification of the card is not possible when the above Compact Flash card is used.
But if you have already used same specification cards for Data Server, those will function
normally.
Contents Summary of Available ATA Flash Cards and Compact Flash Cards with FS30i/300i/300is/31i/310i/310is/32i/320i/320is-MODEL A Additional Manual
- Page 1TECHNICAL REPORT (MANUAL) ＮＯ．ＴＭＮ ０４/126 E Date 13 Dec., 2004 General Manager of CNC Laboratory Available ATA Flash cards and Compact Flash cards with FS30i/300i/300is/31i/310i/310is/32i/320i/320is-MODEL A 1. Communicate this report to : ○ Your information only ○ GE Fanuc-N, GE Fanuc-E FANUC Robotics
- Page 2The following table shows that the ATA Flash cards and Compact Flash cards, which are available to the FS30i/300i/300is/31i/310i/310is/32i/320i/320is-MODEL A, are confirmed by FANUC. The marks on the table mean below. Available : The card confirm to be worked by FANUC － : No planning to test CF : Co
- Page 3note3 FANUC cancels the recommendation of SanDisk’s Compact Flash cards, because those which were shipped from the end of 2003, may not work in Data Server. Even identification of the card is not possible when the above Compact Flash card is used. But if you have already used same specification card