1. Fanuc
  2. Setting addition on connection panel I/O module for i Series CNC (A-73278E/02)

Setting addition on connection panel I/O module for i Series CNC (A-73278E/02) Additional Manual Page 1

Additional Manual
TECHNICAL REPORT (MANUAL) No.TMN98/052E
Date 3 April, 1998
General Manager of
Hardware Laboratory
Setting addition on connection panel I/O module for i Series CNC
1. Communicate this report to:
○　Your information
○　GE Fanuc-N, GE Fanuc-E
　FANUC Robotics
　CINCINNATI MILACRON
○　Machine tool builder
　Sales agency
　End user
2. Summary for Sales Documents
Correction of errors
3. Notice
4. Attached Document
Drawing
No.
　A-732787E/02　（001/2, Revised page only）
5. Registration of Order List data (In case of Order List)
Type of data 　
Lotus 123/Win　・　Oasys　
Order section of issuer
IDE Manager Chief
Previous page
Next page

Contents Summary of Setting addition on connection panel I/O module for i Series CNC (A-73278E/02) Additional Manual

  • Page 1TECHNICAL REPORT (MANUAL) No.TMN98/052E Date 3 April, 1998 General Manager of Hardware Laboratory Setting addition on connection panel I/O module for i Series CNC 1. Communicate this report to: ○ Your information ○ GE Fanuc-N, GE Fanuc-E FANUC Robotics CINCINNATI MILACRON ○ Machine tool builder Sale
  • Page 21. Summary As for the connection panel I/O module for i Series CNC, it is not available to skip 1 or 2 expansion module and connect between the I/O modules such as below figures at the moment. FANUC will add a setting (rotary switch) on each expansion modules. After that, below configurations will b
  • Page 33. Example of the setting (In case of skipping expansion module 1) Base module Ex. module 1 Ex. module 2 Ex. module 3 Set the expansion module 2 “1” And set the expansion module 3 “0”. (In case of skipping expansion module 2) Base module Ex. module 1 Ex. module 2 Ex. module 3 Set the expansion modul