1. Fanuc
  2. Disabling_Fine_Acc_Dec_during_Cs-contouring_mode

Disabling_Fine_Acc_Dec_during_Cs-contouring_mode Additional Manual Page 1

Additional Manual
Ed.
App
rovalChar
g
e
page


 


1
/3
Date
2000.08.25
Descri
p
tion
Draw u
p
FS16i/18i/21i-MA/TA
Disabling Fine Acc./Dec. during Cs-contouring mode
Specifications
A-78232E
FANUC Series 16i/18i/21i-MA/TA
Disabling Fine Acc./Dec. during Cs-contouring mode
Specifications
These specifications may be modified for improvement without notice.
Previous page
Next page

Contents Summary of Disabling_Fine_Acc_Dec_during_Cs-contouring_mode Additional Manual

  • Page 1FANUC Series 16i/18i/21i-MA/TA Disabling Fine Acc./Dec. during Cs-contouring mode Specifications These specifications may be modified for improvement without notice. FS16i/18i/21i-MA/TA  Disabling Fine Acc./Dec. during Cs-contouring mode Specifications  A-78232E Ed. Date Description page 1/3 Dra
  • Page 2• Outline During Cs-contouring mode, Fine acc./dec. function can be disabled for servo axis. Feed-forward function is disabled at the same time for Cs axis as well as servo axis. • Contents During Cs-contouring mode, Fine acc./dec. function can be disabled for the servo axis selected by the PMC sign
  • Page 3• Signal Fine acc./dec. function can be disabled during Cs-contouring mode for the servo axis selected by the PMC signal CDFn(n = 1 –8). [Classification] Input signal [Function] During Cs-contouring mode, Fine acc./dec. function is: 0: Not disabled 1: Disabled. * Fine acc./dec. function is dis