A-79955E/01
Title
Draw
No.
Ed. Date Design Description
Date July.08.’05 Design. Apprv.
11/ 17
page
FANUC Series 30i/31i/32i -MODEL A
Embedded macro specifications
# 6 SCC The same folder as the main program is added to the top of the search order as a
search folder for the following each subprogram call and macro call.
- Subprogram call by M code
- Subprogram call by ASCI code
- Subprogram call by the second auxiliary function code
- Macro call by G code
- Macro call by M code
- Macro call by T code
- One-touch macro call
0: Not added
1: Added
When a search folder is added, a search is made in the following order:
0) Folder only for embedded macro (With the embedded macro-function. )
1) Folder where the main program is stored
2) Common program folder, which is an initial folder
3) MTB-dedicated folder 2, which is an initial folder
4) MTB-dedicated folder 1, which is an initial folder
5) System folder, which is an initial folder
The folders of 2) through 5) can be excluded from search target folders by setting the
parameters LIB, MC2, MC1, and SYS.
# 7 SCF It is set whether to add the search folder in the following each subprogram call and
macro call.
- Subprogram call by M98
- Figure copy by G72.1/G72.2
- Macro call by G65/G66/G66.1
- Macro interrupt by M96
0: Not added
1: Added
When a search folder is added, CNC searches in the following order:
0) Folder only for embedded macro (With the embedded macro-function. )
1) Folder where the main program is stored
2) Common program folder, which is an initial folder
3) MTB-dedicated folder 2, which is an initial folder
4) MTB-dedicated folder 1, which is an initial folder
5) System folder, which is an initial folder
The folders of 3) through 5) can be excluded from search target folders by setting the
parameters MC2, MC1, and SYS.