A-79955E/01
Title
Draw
No.
Ed. Date Design Description
Date July.08.’05 Design. Apprv.
12/ 17
page
FANUC Series 30i/31i/32i -MODEL A
Embedded macro specifications
#7 #6 #5 #4 #3 #2 #1 #0
6001 CCV PV5
[Input type] parameter input
[Data type] Bit path
#3 PV5 In the common variables of the custom macro:
0: #500 to #549(*) are output.
1: #100 to #149(*1) and #500 to #549(*1) are output.
(*1)Output variables are as follows according to the combination of added options.
When the parameter PV5=0
Option “Addition of custom macro common variables”
Non Yes
Non #500 to #549 #500 to #999
Embedded
macro
Yes #500 to #549 #500 to #999
When the parameter PV5=1
Option “Addition of custom macro common variables”
Non Yes
Non
#100 to #149 and
#500 to #549
#100 to #199 and
#500 to #999
Embedded
macro
Yes
#100 to #149, #200 to #499
and #500 to #549
#100 to #199, #200 to #499
and #500 to #999
#6 CCV When CNC is reset, the common variables #100 to #149(*1) which are cleared by
turning off the power:
0: is cleared as empty.
1: is not cleared.
(*1) Cleared variables are as follows according to the combination of added options.
Option “Addition of custom macro common variables”
Non Yes
Non
#100 to #149 #100 to #199
Embedded
macro
Yes
#100 to #149 and
#200 to #499
#100 to #199 and
#200 to #499