
1. General
In dual check safety function, when the spindle alarm occurs, power-down causes the
spindle motor to continue rotating for a certain time.
By using this function, the spindle stops with controlling when the exceeding spindle
safety speed alarm occurs.
2. Specifications
In dual check safety function, when the parameter No.4399#1 (CTLSTP) is “1”, the
spindle stops with controlling at exceeding spindle safety speed alarm.
Alarm numbers of exceeding spindle safety speed are as follows.
Alarm 757 Spindle-1 safety speed over
Alarm 767 Spindle-2 safety speed over
Alarm 777 Spindle-3 safety speed over
Alarm 787 Spindle-4 safety speed over
Alarm 9069 Safety speed over (AL-069)
Set the parameter No.1947 / No.1948 (MCC off timer 1/2) in order to wait MCC off
until the spindle stops.
MCC off timer No.1947/No.1948
MCC on enable signal
MCF1<F191#1>, MCF2<DO+000#1>
Exceed speed alarm detected
peedSpindle s
MCC contact state
Edit
Apprv.
Desig.
Sheet
TITLE
Draw
No.
Date
Design
Descri
tion
Date
FANUC Series 16i/18i/21i - B, 18i - MB
Dual Check Safety Spindle Controlled Stop at
Exceeding Safe Speed Specifications
A-90080E
2005.05.31 M.Ito
2
4