Series 30i-A/31i-A5, 16i-MB/18i-MB5/16i-TB, 15i-MB Additional Manual Page 1
Additional Manual
1/10
PAGEEDT.
DATE
DESIGN
DESCRIPTION
TITLE
No.
FS30i-A/31i-A5,FS16i-MB/18i-MB5/16i-
TB, FS15i-MA Table of the parameters
for 5-axis machining features
01 04.05.11 Ohtsuki Newly Registered
FANUC LTD.
A-79370E
FANUC Series 30i-A/31i-A5,
FANUC Series 16i-MB/18i-MB5/16i-TB
FANUC Series 15i-MB
Table of the parameters for 5-axis machining features
1.Type of applied technical documents
Name
Spec.No./Ed.
2.Summary of Change
Group Name/Outline
New, Add,
Correct,
Delete
Applicable
Date
Basic
Option Explanation for the following features
1) FS30i-A/31i-A5
Tilted working plane command,
Tool center point control for 5-axis
machining,
Tool radius compensation for 5-axis
machining,
Tool length compensation along tool
direction,
Manual feed for 5-axis machining
2) FS16 i-MB/18i-MB5/16i-TB
Tilted working plane command,
Tool center point control for 5-axis
machining,
Tool radius compensation for 5-axis
machining,
Tool length compensation along tool
direction,
Manual feed for 5-axis machining
3) FS15i-MA
Tilted working plane command,
Tool center point control for 5-axis
machining,
Tool center
p
oint control
,
Add
Immediately
Contents Summary of Series 30i-A/31i-A5, 16i-MB/18i-MB5/16i-TB, 15i-MB Additional Manual
- Page 1FANUC Series 30i-A/31i-A5, FANUC Series 16i-MB/18i-MB5/16i-TB FANUC Series 15i-MB Table of the parameters for 5-axis machining features 1.Type of applied technical documents Name Spec.No./Ed. 2.Summary of Change New, Add, Applicable Group Name/Outline Correct, Date Delete Basic Option Explanation fo
- Page 23-D cutter compensation, Cutter compensation for rotary table, 3-D cutter compensation for rotary table, Tool length compensation in tool axis direction, 3-D handle feed Unit Maintenance Parts Notice There are many parameters for 5-axis machining features. So, on this document, they are summed up fo
- Page 3FANUC Series 30i-A/31i-A5, FANUC Series 16i-MB/18i-MB5/16i-TB, FANUC Series 15i-MB Table of the Parameters for 5-Axis Machining Features (1) The parameters for the following 5-axis machining features on FS30i-A/31i-A5, FS16i-MB/18i-MB5/16i-TB and FS15i-MB are described. Refer to each table(Table
- Page 4(2) The parameters described on each table are used for each applied feature. 2-1) Table A
FS30i-A : Tilted working plane command(A02B-0303-S676), Tool center point control for 5-axis machining(A02B-0303-S677), Tool radius compensation for 5-axis machining(A02B-0303-S667), Manual - Page 519666 19666 7548 Tool holder offset for tool axis direction tool length compensation 19667 19667 7745 Controlled-point shift vector - 19720 - Axis number of linear axis 1 (Note 1) - 19721 - Axis number of linear axis 2 (Note 1) - 19722 - Axis number of linear axis 3 (Note 1) 19680 19680 6161 Mechani
- Page 619712 19712 6193 Intersection offset vector between the second and first rotation axes of the tool (X-axis of the basic three axes) 19713 19713 6194 Intersection offset vector between the second and first rotation axes of the tool (Y-axis of the basic three axes) 19714 19714 6195 Intersection offset
- Page 72-2) Table B
FS16i-MB : Tool radius compensation for 5-axis machining(A02B-0282-S667) for Tool rotation type machine / is available when the parameter No.19607#4 is set to “0”. FS18i-MB5 : Tool radius compensation for 5-axis machining(A02B-0284-S667) for Tool rotation ty
- Page 82-3) Table C
FS16i-MB : Tool radius compensation for 5-axis machining(A02B-0282-S667) for Rotary table type machine / is available when the parameter No.19607#4 is set to “0”. FS18i-MB5 : Tool radius compensation for 5-axis machining(A02B-0284-S667) for Rotary table type
- Page 92-4) Table D
FS16i-MB : Tool radius compensation for 5-axis machining(A02B-0282-S667) for Mixed-type machine / is available when the parameter No.19607#4 is set to “0”. FS18i-MB5 : Tool radius compensation for 5-axis machining(A02B-0284-S667) for Mixed-type machine /
- Page 102-5) Table E
FS30i-A : Tool length compensation along tool direction(A02B-0303-S670) FS31i-A5 : Tool length compensation along tool direction(A02B-0306-S670) FS16i-MB : Tool length compensation along tool direction(A02B-0282-S670) FS18i-MB5 : Tool length compensation along tool di - Page 82-3) Table C