
B–70114EN/04
B. FANUC LASER C SERIES
SPECIFICATIONS
APPENDIX
169
Item Contents
Model C3000C
(Short)
C3000C
(Long)
C3000D
(Short)
C3000D
(Long)
Principle RF discharge excited fast axial flow CO
2
laser
Structure Oscillator and auxiliary unit separated Oscillator and power source integrated
Rated power 3,000W
Max power 3,000W
Pulse power peak 4,000W (<500Hz, <50%) 3,800W (<500Hz, <50%)
Power stability "2% (For 8 hours operation at rated power level with power feedback control and
calibration function)
Wave length 10.6 µm
Beam mode Lower order mode
Beam diameter (Exit) <f27mm <f24mm <f27mm <f24mm
Polarization Circular Linear (45°) (Circular) Circular Linear (45°) (Circular)
Beam divergence Less than 2 m rad (Full angle)
Pulse command freq. 5 to 2,000 Hz
Pulse command duty 0 to 100%
Laser gas composition CO
2
: He: N
2
= 5: 40: 55 (Volume, N
2
balance "5% for each composition)
Laser gas pressure 0.175 " 0.025 MPa (Gauge pressure)
Laser gas consumption Approx. 20 liter/hour Approx. 10 liter/hour
Cooling water rate >120 liter/min
Water temperature 20 to 30°C
Temperature stability "2°C (Power stability of "2%)
Cooling water pressure Less than 0.5 Mpa (Gauge pressure)
Water pressure loss
(Rated flow)
<0.3 MPa <0.25 MPa
Chiller capacity >33.7 kW
Electric power line 3f 200 VAC +10%, –15% 50/60Hz or 3f 220 VAC +10%, –15% 60Hz
Grounding Earth (<10 ohm), Protective earth
Electric power
Consumption
44 KVA
Maximum current 150A
Electrical shutter ————— Trigger type
Hour meter Integrated the operational time of a exhaust pump
Weight 900 kg (Osc) 150 kg (Aux) 800 kg
NOTE
Use mechanical shutter when stopping machine operation.