
APPENDIX
B–70114EN/04
B. FANUC LASER C SERIES
SPECIFICATIONS
170
Item Contents
Model C4000A
(Short)
C4000A
(Long)
C6000B
Principle RF discharge excited fast axial flow CO
2
laser
Structure Oscillator and power source integrated
Rated power 4,000W 6,000W
Max power 4,000W 6,000W
Pulse power peak 5,000W (<500Hz, <50%) —————
Power stability "2% (For 8 hours operation at rated power level with power feedback control and
calibration function)
Wave length 10.6 µm
Beam mode Lower order mode
Beam diameter (Exit) <f27mm <f24mm <f28mm
Polarization Circular Linear (90° Vertical) Linear (90° Vertical)
Beam divergence Less than 2 m rad (Full angle)
Pulse command freq. 5 to 2,000 Hz
Pulse command duty 0 to 100%
Laser gas composition CO
2
: He: N
2
= 5: 40: 55 (Volume, N
2
balance "5% for each composition)
Laser gas pressure 0.175 " 0.025 MPa (Gauge pressure)
Laser gas consumption Approx. 10 liter/hour Approx. 40 liter/hour
Cooling water rate >160 liter/min >250 liter/min
or (125+125) twin
Water temperature 20 to 30°C
Temperature stability "2°C (Power stability of "2%)
Cooling water pressure Less than 0.5 MPa (Gauge pressure)
Water pressure loss
(Rated flow)
<0.25 MPa —————
Chiller capacity >44.2 kW >67.5 kW
Electric power line 3f 200 VAC +10%, –15% 50/60Hz or 3f 220 VAC +10%, –15% 60Hz
Grounding Earth (<10 ohm), Protective earth
Electric power
Consumption
55KVA 90KVA
Maximum current 190A 300A
Electrical shutter Trigger type —————
Hour meter Integrated the operational time of a exhaust pump
Weight 900 kg 1,800 kg
NOTE
Use mechanical shutter when stopping machine operation.