1. Fanuc
  2. 0i-PB Specifications

0i-PB Specifications Additional Manual Page 6

Additional Manual
0i
PB
Item Specifications
○
9" monochrome CRT/MDI
●
7.2" monochrome LCD/MDI
●
7.2" monochrome LCD
●
8.4" color LCD/MDI
●
8.4" color LCD
●
10.4" color LCD
●
Display unit with PC function *9
●
2 slot 112(W)x380(H)x172(D)mm
●
●
●
●
●
●
●
Separate MDI (personal computer key,
vertical type) *2
●
PMC
SYSTEM
PMC-SB7
●
Built-in I/O　DI/DO;96/64 points
○
☆
☆
☆
☆
☆
☆
☆
☆
☆
☆
●
●
●
●
●
☆
☆
☆
DC24V±10%
○
○
○
At operating: 0.5G or less
At nono
p
eratin
g
: 1G or less
○
Small operator's panel
Display unit *8
Vibration
Machine interface (I/O Link)　　　
DI/DO;1024/1024 points
Control unit dimensions
FANUC SERVO AMPLIFIER
　αi series (PSM,SVM,SPM)
At operating: 0℃～55℃
At nonoperating: -20℃～60℃
Ambient relative humidity *9
Position detector unit for full-closed
control (for full-closed control)
Pulse coder/optical scale (2-phase pulse interface)
Pulse coder/optical scale (serial interface)
Normally: 75%RH or less
(No dew, nor frost allowed)
Short term (within one month): 95%RH or less(No
dew, nor frost allowed)
FANUC AC SERVO MOTOR βi s series
Separate MDI
(standard size, vertical type) (for 10.4" LCD)
Ambient temperature of unit *9
Separate MDI
(standard size, horizontal type) (for 10.4" LCD)
Separate MDI
(small size, horizontal type) (for 8.4" LCD)
Separate MDI
(standard size, horizontal/vertical type) (for 8.4" LCD)
Basic instruction: 0.033μsec/step
Max. step number ladder: 24000
Standard operator's panel
Input power supply
Connectable servo amplifier
Operator's panel I/O module (with MPG I/F)
FANUC SERVO AMPLIFIER
　βi series (SVPM)
FANUC SERVO AMPLIFIER
　βi series (SVM)
SERVO GUIDE
Connection panel I/O module (DI/DO module,
2A output module, Analog input module)
I/O Unit-MODEL A
Additional peripheral axes (I/O Link βservo)
Manual pulse generator
Connectable servo motor
FANUC AC SERVO MOTOR αi s series
α(HV)i s series
Operator's panel I/O module (without MPG I/F)
Separate MDI unit
Separate MDI
(standard size, horizontal/vertical type) (for 7.2" LCD)
Others
NC ready, servo ready, automatic operation,
automatic operation start lamp, feed hold, reset, NC
alarm, distribution end, rewinding, inch input, cutting,
inposition, thread cutting, tapping, etc.
Status output signal
Separate MDI
(small size, horizontal type) (for 7.2" LCD)
I/O module for machine I/F (with MPG I/F)
I/O module for machine I/F (without MPG I/F)
5 A-80943E/01
Previous page
Next page

Contents Summary of 0i-PB Specifications Additional Manual

  • Page 1TECHNICAL REPORT (MANUAL) ＮＯ．ＴＭＮ0３／048E Date June,02 2003 General Manager of CNC Laboratory Series 0i-PB Specifications １．Communicate this report to: O Your information only O GE Fanuc-A, GE Fanuc-E FANUC Robotics CINCINNATI MILACRON O Machine tool builder Sales agency End user ２．Summary for Sales D
  • Page 2Specifications for Series 0i -PB 01 Edition ：Standard ●：Standard option œ：Option ＊：Function included in another option －：Not available Note) Some combinations of these options are restricted. In case of CNC Display with Personal Computer function, using CNC Screen Display Function is a premise. 0i
  • Page 30i Item Specifications PB Interpolation functions Positioning G00 (Linear interpolation type positioning is possible) ○ Exact stop mode G61 ○ Exact stop G09 ○ Linear interpolation ○ Circular interpolation Multi-quadrant is possible ○ Dwell Dwell in seconds ○ Helical interpolation Circular interpolat
  • Page 40i Item Specifications PB G code system A/B ○ Pattern function ○ Nibbling G68, G69, M code ○ Pattern base point command G72 ○ Memory and call by A/B macro 5 ○ U/V/W macro ○ Multi-piece machining ○ Command for restarting multi-piece ○ machining Repositioning G75, M code ○ Bending compensation G38, G3
  • Page 50i Item Specifications PB Actual cutting feedrate display ○ Directory display of floppy cassette ○ Directory display and punch for each ○ group Graphic function Display unit with graphic is required. ☆ Servo setting screen ○ Servo waveform display Display unit with graphic is required. ＊ Display of
  • Page 60i Item Specifications PB Others NC ready, servo ready, automatic operation, automatic operation start lamp, feed hold, reset, NC Status output signal ○ alarm, distribution end, rewinding, inch input, cutting, inposition, thread cutting, tapping, etc. 9" monochrome CRT/MDI ● 7.2" monochrome LCD/MDI
  • Page 7Software of personal computer part in case of the CNC system which is connected with personal computer via HSSB(High Speed Serial Bus) Items Specifications Remarks Operating system Windows® 2000 *4 Extended library FOCAS1 *7 CNC basic operation package Option CNC screen display function Option Softw
  • Page 8(Note) *1 : There are some limitations in case of CNC Display with Personal Computer Function. *2 : Only for CNC Display with Personal Computer Function. *3 : The actual registrable value might changes according to the registered number of programs and the program si *4 : Intel, Pentium are register