1. Fanuc
  2. 0i-PB Specifications

0i-PB Specifications Additional Manual Page 8

Additional Manual
(Note)
*8 : LCD is manufactured by using high precision technology, however it has points which are always bright or dark.
This phenomenon is caused by LCD's structure, and not defects.
*9 : Please refer to page 18 for CNC Display Unit with Personal Computer Function.
Each companie's name and product's name is the trademark or registered trademark.
*5 : A special driver is necessary to display 16 or more colors.
*6 : Extension Board for IBM PC should be prepared by MTB.
*7 : FOCAS1 = F
ANUC Open Cnc API Specifications version 1
*3 : The actual registrable value might changes according to the registered number of programs and the program si
*4 : Intel, Pentium are registered trademarks of Intel Corporation. Celeron is the trademark of Intel Corporation.
MIcrosoft, Windows, VIsual C++, Visual Basic and eMbadded Visual Tools logo are registered trademarks of
Microsoft Corporation. CompactFlash is registered trademark of SanDisk Corporation.
*2 : Only for CNC Display with Personal Computer Function.
*1 : There are some limitations in case of CNC Display with Personal Computer Function.
7 A-80943E/01
Previous page
Next page

Contents Summary of 0i-PB Specifications Additional Manual

  • Page 1TECHNICAL REPORT (MANUAL) ＮＯ．ＴＭＮ0３／048E Date June,02 2003 General Manager of CNC Laboratory Series 0i-PB Specifications １．Communicate this report to: O Your information only O GE Fanuc-A, GE Fanuc-E FANUC Robotics CINCINNATI MILACRON O Machine tool builder Sales agency End user ２．Summary for Sales D
  • Page 2Specifications for Series 0i -PB 01 Edition ：Standard ●：Standard option œ：Option ＊：Function included in another option －：Not available Note) Some combinations of these options are restricted. In case of CNC Display with Personal Computer function, using CNC Screen Display Function is a premise. 0i
  • Page 30i Item Specifications PB Interpolation functions Positioning G00 (Linear interpolation type positioning is possible) ○ Exact stop mode G61 ○ Exact stop G09 ○ Linear interpolation ○ Circular interpolation Multi-quadrant is possible ○ Dwell Dwell in seconds ○ Helical interpolation Circular interpolat
  • Page 40i Item Specifications PB G code system A/B ○ Pattern function ○ Nibbling G68, G69, M code ○ Pattern base point command G72 ○ Memory and call by A/B macro 5 ○ U/V/W macro ○ Multi-piece machining ○ Command for restarting multi-piece ○ machining Repositioning G75, M code ○ Bending compensation G38, G3
  • Page 50i Item Specifications PB Actual cutting feedrate display ○ Directory display of floppy cassette ○ Directory display and punch for each ○ group Graphic function Display unit with graphic is required. ☆ Servo setting screen ○ Servo waveform display Display unit with graphic is required. ＊ Display of
  • Page 60i Item Specifications PB Others NC ready, servo ready, automatic operation, automatic operation start lamp, feed hold, reset, NC Status output signal ○ alarm, distribution end, rewinding, inch input, cutting, inposition, thread cutting, tapping, etc. 9" monochrome CRT/MDI ● 7.2" monochrome LCD/MDI
  • Page 7Software of personal computer part in case of the CNC system which is connected with personal computer via HSSB(High Speed Serial Bus) Items Specifications Remarks Operating system Windows® 2000 *4 Extended library FOCAS1 *7 CNC basic operation package Option CNC screen display function Option Softw
  • Page 8(Note) *1 : There are some limitations in case of CNC Display with Personal Computer Function. *2 : Only for CNC Display with Personal Computer Function. *3 : The actual registrable value might changes according to the registered number of programs and the program si *4 : Intel, Pentium are register