1. Fanuc
  2. 0i-PB Specifications

0i-PB Specifications Additional Manual Page 7

Additional Manual
Windows
®
2000
*4
FOCAS1 *7
CNC basic operation package
CNC screen display function
Ladder editing package
Machining status monitor package
Visual C++
®
Visual Basic
®
*4
*4
ISA Bus and HSSB for 1 channel
ISA Bus and HSSB for 2 channel
PCI Bus and HSSB for 1 channel
PCI Bus and HSSB for 2 channel
Optical fiber cable
Hardware of FANUC CNC Display Unit with Personal Computer Function
Pentium
®
Ⅲ,
Celeron
TM
,
MMX Pentium
®
*4
Max. 128MBytes
10GBytes
Touch panel
PCMCIA×1 slot
Full keyboard×1／Mouse×1
Serial (RS-232C)×2／Parallel×1
Floppy disk×1
USB×2
High-Speed Serial Bus
(Optical fiber cable)
PCI spec. extension slot
(Short card size)×2
*6
At operating: 5℃～45℃
At nonoperating: -20℃～60℃
Ambient relative humidity
Normally: 10%～75%RH or less
Short term (within one month):
10%～90%RH or less
(No dew, nor frost allowed)
Wet Humidity: 29℃ or less
Extension slot
Ambient temperature of unit
Ports
Touch panel is connected to
serial port 1.
CNC interface Max. length: 100m
Monitor
10.4" color TFT LCD (640×480 dots), or
12.1" color TFT LCD (800×600 dots), or
15.0" color TFT LCD (1024×768 dots)
Display Max. 65536 colors
Several models limited to Max.
4096 colors *5 *8
Option
Main memory
Hard disk
Items
Specifications
Remarks
CPU
Connecting cable Max. length: 100m
Personal computer requirements
CPU: Pentium
®
or more
ISA slot or PCI slot 1 or more
(By selectable personal computer side
interface board)
For environmental
requirements of the personal
computer, refer to the manual
supplied with the machine.
CNC side interface board for option slot
Personal computer side interface board
For ISA slot in the personal
computer
Using voltage: +5V only
For PCI slot in the personal
computer
Using voltage: +5V only
Hardware of HSSB(High Speed Serial Bus) and Required hardware of commercially
available personal computer in case of the CNC system which is connected with the
personal computer via HSSB(High Speed Serial Bus).
Items
Specifications
Remarks
Option
Software packages
Development tools
Microsoft Corp.
Microsoft Corp.
Option
Option
Option
DNC operation management package
Option
Operating system
Extended library
Software of personal computer part in case of the CNC system which is
connected with personal computer via HSSB(High Speed Serial Bus)
Items
Specifications
Remarks
6 A-80943E/01
Previous page
Next page

Contents Summary of 0i-PB Specifications Additional Manual

  • Page 1TECHNICAL REPORT (MANUAL) ＮＯ．ＴＭＮ0３／048E Date June,02 2003 General Manager of CNC Laboratory Series 0i-PB Specifications １．Communicate this report to: O Your information only O GE Fanuc-A, GE Fanuc-E FANUC Robotics CINCINNATI MILACRON O Machine tool builder Sales agency End user ２．Summary for Sales D
  • Page 2Specifications for Series 0i -PB 01 Edition ：Standard ●：Standard option œ：Option ＊：Function included in another option －：Not available Note) Some combinations of these options are restricted. In case of CNC Display with Personal Computer function, using CNC Screen Display Function is a premise. 0i
  • Page 30i Item Specifications PB Interpolation functions Positioning G00 (Linear interpolation type positioning is possible) ○ Exact stop mode G61 ○ Exact stop G09 ○ Linear interpolation ○ Circular interpolation Multi-quadrant is possible ○ Dwell Dwell in seconds ○ Helical interpolation Circular interpolat
  • Page 40i Item Specifications PB G code system A/B ○ Pattern function ○ Nibbling G68, G69, M code ○ Pattern base point command G72 ○ Memory and call by A/B macro 5 ○ U/V/W macro ○ Multi-piece machining ○ Command for restarting multi-piece ○ machining Repositioning G75, M code ○ Bending compensation G38, G3
  • Page 50i Item Specifications PB Actual cutting feedrate display ○ Directory display of floppy cassette ○ Directory display and punch for each ○ group Graphic function Display unit with graphic is required. ☆ Servo setting screen ○ Servo waveform display Display unit with graphic is required. ＊ Display of
  • Page 60i Item Specifications PB Others NC ready, servo ready, automatic operation, automatic operation start lamp, feed hold, reset, NC Status output signal ○ alarm, distribution end, rewinding, inch input, cutting, inposition, thread cutting, tapping, etc. 9" monochrome CRT/MDI ● 7.2" monochrome LCD/MDI
  • Page 7Software of personal computer part in case of the CNC system which is connected with personal computer via HSSB(High Speed Serial Bus) Items Specifications Remarks Operating system Windows® 2000 *4 Extended library FOCAS1 *7 CNC basic operation package Option CNC screen display function Option Softw
  • Page 8(Note) *1 : There are some limitations in case of CNC Display with Personal Computer Function. *2 : Only for CNC Display with Personal Computer Function. *3 : The actual registrable value might changes according to the registered number of programs and the program si *4 : Intel, Pentium are register