1. Fanuc
  2. Series 30i-Model A, Automatic Data Backup Function

Series 30i-Model A, Automatic Data Backup Function Additional Manual Page 5

Additional Manual
A-79488E
Title
Draw
No.
Ed. Date Design Description
Date Jun.05.’04 Design. Apprv.
5/7
Page
FANUC Series 30i-MODEL A
Automatic data backup function
Signal for executing automatic data backup ATBK<F0520#0>
[Classification] Output signal
[Function] This signal becomes 1 while executing the automatic data backup. When the
CNC data is updated while the emergency stop, please confirm executing
automatic data backup signal ATBK and execute appropriate processing.
Signal address
#7 #6 #5 #4 #3 #2 #1 #0
F0520 ATBK
Parameters
#7 #6 #5 #4 #3 #2 #1 #0
10340 EEB EIB AAP ABI ABP
[Input type] Parameter input
[Data type] Bit
# 0 ABP Automatic data backup at every power-on is
0 : Invalid
1 : Valid
# 1 ABI Keeping initial backup data is
0 : Invalid
1 : Valid
# 2 AAP Backup of NC program and NC program folder is
0 : Invalid
1 : Valid
# 6 EIB In next CNC power-on, initial backup data is:
0 : Not updated
1 : Updated
Note
When this parameter is used, set 2 or more the
parameter No.10342, and set 1 bit1 (ABI) of the
parameter No.10340.
# 7 EEB Manual Backup during emergency stop is
0 : Not executed
1 : Executed
Note
When this parameter is used, set 1 or more the
parameter No.10342.
Previous page
Next page

Contents Summary of Series 30i-Model A, Automatic Data Backup Function Additional Manual

  • Page 1FANUC Series 30i-MODEL A Automatic data backup function Specifications FANUC Series 30i-MODEL A Title Automatic data backup function Draw A-79488E No. Ed. Date Design Description Page 1/7 Date Jun.05.’04 Design. Apprv.
  • Page 2Outline The data in FROM/SRAM of CNC is automatically backed up to FROM that the battery is unnecessary, and the data can be restored if necessary. When the CNC data disappears by an unexpected situation such as a dead battery, the CNC data can be easily restored. Up to three generations of backup d
  • Page 3- Automatic data backup at every power-on When the power is turned on, the CNC data can be automatically backed up. The following settings are necessary for this function. - Bit 0 (ABP) of parameter No.10340 set to 1. - Parameter No.10342 set to 1 or more. - When NC program and NC program folder is
  • Page 4- Keeps initial backup data Initial backup data can be kept in FROM. For example, the state the shipment and after the Machine adjustment is stored as initial backup data. The number of backup data of parameter No.10342 should set two or more. And the first backup data is the initial backup data. Th
  • Page 5Signal for executing automatic data backup ATBK [Classification] Output signal [Function] This signal becomes 1 while executing the automatic data backup. When the CNC data is updated while the emergency stop, please confirm executing automatic data backup signal ATBK and execute appropriat
  • Page 610341 Interval of periodic automatic data backup at power-on [Input type] Parameter input [Data type] Byte [Valid data range] 0 to 365 This parameter sets backup interval by days when the periodic automatic data backup is executed, When the power is turned on after specified days progress from previ
  • Page 7NOTE Note 1. The value which can be set to parameter No.10342 has the restriction by the program capacity, the SRAM capacity, and the using FROM/SRAM module. 2. Please do not turn off the power of CNC during backing up and restoring. FANUC Series 30i-MODEL A Title Automatic data backup function Draw