Series 30i-Model A, Automatic Data Backup Function Additional Manual Page 6

Additional Manual

Page of 7

/ 7

A-79488E

Title

Draw

No.

Ed. Date Design Description

Date Jun.05.’04 Design. Apprv.

6/7

Page

FANUC Series 30i-MODEL A

Automatic data backup function

10341 Interval of periodic automatic data backup at power-on

[Input type] Parameter input

[Data type] Byte

[Valid data range] 0 to 365

This parameter sets backup interval by days when the periodic automatic

data backup is executed, When the power is turned on after specified days

progress from previous backup, the CNC data can be automatically backed

up. If 0 is specified in this parameter, this function is not performed.

10342 Number of backup data

[Input type] Parameter input

[Data type] Byte

[Valid data range] 0 to 3

This paramer sets the number of backup data. If 0 is specified in this

parameter, this function is not performed.

Diagnosis

The execution status of backup can be confirmed in diagnosis screen.

#7 #6 #5 #4 #3 #2 #1 #0

1016 ANG ACM DT3 DT2 DT1 AEX

# 0 AEX Automatic data backup is:

0 : Not executing

1 : Executing

# 1 DT1 In previous backup,

0 : Data 1 is not updated.

1 : Data 1 is updated.

# 2 DT2 In previous backup,

0 : Data 2 is not updated.

1 : Data 2 is updated.

# 3 DT3 In previous backup,

0 : Data 3 is not updated.

1 : Data 3 is updated.

# 6 ACM Automatic data backup was

0 : Not executed

1 : Executed

# 7 ANG In automatic data backup,

0 : The error does not occur.

1 : The error occurred.

Contents Summary of Series 30i-Model A, Automatic Data Backup Function Additional Manual

Page 1FANUC Series 30i-MODEL A Automatic data backup function Specifications FANUC Series 30i-MODEL A Title Automatic data backup function Draw A-79488E No. Ed. Date Design Description Page 1/7 Date Jun.05.’04 Design. Apprv.
Page 2Outline The data in FROM/SRAM of CNC is automatically backed up to FROM that the battery is unnecessary, and the data can be restored if necessary. When the CNC data disappears by an unexpected situation such as a dead battery, the CNC data can be easily restored. Up to three generations of backup d
Page 3- Automatic data backup at every power-on When the power is turned on, the CNC data can be automatically backed up. The following settings are necessary for this function. - Bit 0 (ABP) of parameter No.10340 set to 1. - Parameter No.10342 set to 1 or more. - When NC program and NC program folder is
Page 4- Keeps initial backup data Initial backup data can be kept in FROM. For example, the state the shipment and after the Machine adjustment is stored as initial backup data. The number of backup data of parameter No.10342 should set two or more. And the first backup data is the initial backup data. Th
Page 5Signal for executing automatic data backup ATBK [Classification] Output signal [Function] This signal becomes 1 while executing the automatic data backup. When the CNC data is updated while the emergency stop, please confirm executing automatic data backup signal ATBK and execute appropriat
Page 610341 Interval of periodic automatic data backup at power-on [Input type] Parameter input [Data type] Byte [Valid data range] 0 to 365 This parameter sets backup interval by days when the periodic automatic data backup is executed, When the power is turned on after specified days progress from previ
Page 7NOTE Note 1. The value which can be set to parameter No.10342 has the restriction by the program capacity, the SRAM capacity, and the using FROM/SRAM module. 2. Please do not turn off the power of CNC during backing up and restoring. FANUC Series 30i-MODEL A Title Automatic data backup function Draw