1. Fanuc
  2. QuickTurn Electronic Lathe

QuickTurn Electronic Lathe Connection manual (Hardware) Page 30

Connection manual (Hardware)
QuickTurn™
GFKE-0201B-EN - 30 - GE Fanuc Automation S.A.
8 Special Keep Relays
K0.0 Reference Return Completed Check Bypass
For Cycle Start
0: Reference Done Checked
1: Reference Done Not Checked
K0.1 Machine Door Closed/Open Switch Bypass
For Spindle Running
0: Door Switch Checked
1: Door Switch Not Checked
K0.2 Thermic Motor Relay Bypass 0: Relay Checked
1: Relay Not Checked
K0.3 Spindle Running Bypass For Cycle Start 0: Spindle Running Checked
1
: Spindle Running Not Checked
K0.4 Machine Door Closed/Open Switch Bypass
For Cycle Start
0: Door Switch Checked
1: Door Switch Not Checked
K0.6 Tails Stock Z+ Limit Switch 0: Tail Stock Switch Checked
1: Tail Stock Switch Ignored
K1.0 Keep Relay to Protect Programs/Offsets 0: Not Protected
1: Protected (Do not set)
K1.1 Auxiliary Function Look 0: Not Looked
1: Looked (Do not set)
K1.2 Single Block Mode 0: Normal
1: Single Block (Do not set)
K5.5 If the T-Code memorised together with cycle
does not correspond to active tool,
0: Cycle stopped by Alarm
1: Cycle on hold restart possible
K5.6 Gear Check if Spindle Speed is Saved to
Cycle (Set to 1 if machine has no gears)
0: Gear is Checked
1: Gear is Not Checked
Previous page
Next page

Contents Summary of QuickTurn Electronic Lathe Connection manual (Hardware)

  • Page 1GE Fanuc Automation QuickTurn™ Electronic Lathe Connection Manual GFKE-0201B-EN Software Version0iV1_12 May 2004
  • Page 2QuickTurn™ GFKE-0201B-EN -2- GE Fanuc Automation S.A.
  • Page 3QuickTurn™ Table of Contents 1 PRODUCT DESCRIPTION .......................................................................................................................5 2 APPLICABILITY OF THIS MANUAL..................................................................................................
  • Page 4QuickTurn™ GFKE-0201B-EN -4- GE Fanuc Automation S.A.
  • Page 5QuickTurn™ 1 Product description The Quick Turn is a CNC based control package for simple turning machines, including hardware and software. Product is designed for manual machine concepts and replaces mechanical parts by electronical ones. In this way conventional machining by means of hand wheels,
  • Page 6QuickTurn™ 2 Applicability of this Manual This Manual is a shorted version of Fanuc manual “Fanuc Series 0i Mate Model B Connection Manual Hardware B-63833EN_02”, focussing on most important items for connecting Quick Turn. For any detailed question refer to former mentioned manual. The hardware use
  • Page 7QuickTurn™ 3 Hard and Software Used for Connection of Quick Turn The hardware basis used for connection in this manual is as follows: 0i Mate TB Hardware • A02B-0301-B801 Basic Unit Stand Alone Type, 1 Slot • A02B-0301-H201 Main Board PMC-SA1 • A02B-0299-J020 Analog Spindle Module • A02B-0299-H071 S
  • Page 8QuickTurn™ Spindle • Analog spindle driven by frequency converter available on the marked NOTE All spindles available for 0i Mate TB are supported by Quick Turn Cable Material • A02B-0236-K85* (*= 1, 2, 3, 4, 5, 6) Optical Fiber Cables for Beta I Amplifier Connection • LX660-2007-T010/L*R003 I/O Lin
  • Page 9QuickTurn™ 4 Connector Lay Out 0i Mate TB GFKE-0201B-EN -9- GE Fanuc Automation S.A.
  • Page 10QuickTurn™ 5 Total Connection Diagram 0i Mate TB GFKE-0201B-EN - 10 - GE Fanuc Automation S.A.
  • Page 11QuickTurn™ 6 Connection to the Operators Panel I/O Module GFKE-0201B-EN - 11 - GE Fanuc Automation S.A.
  • Page 12QuickTurn™ GFKE-0201B-EN - 12 - GE Fanuc Automation S.A.
  • Page 13QuickTurn™ GFKE-0201B-EN - 13 - GE Fanuc Automation S.A.
  • Page 14QuickTurn™ GFKE-0201B-EN - 14 - GE Fanuc Automation S.A.
  • Page 15QuickTurn™ GFKE-0201B-EN - 15 - GE Fanuc Automation S.A.
  • Page 16QuickTurn™ GFKE-0201B-EN - 16 - GE Fanuc Automation S.A.
  • Page 17QuickTurn™ GFKE-0201B-EN - 17 - GE Fanuc Automation S.A.
  • Page 18QuickTurn™ GFKE-0201B-EN - 18 - GE Fanuc Automation S.A.
  • Page 19QuickTurn™ GFKE-0201B-EN - 19 - GE Fanuc Automation S.A.
  • Page 20QuickTurn™ GFKE-0201B-EN - 20 - GE Fanuc Automation S.A.
  • Page 21QuickTurn™ GFKE-0201B-EN - 21 - GE Fanuc Automation S.A.
  • Page 22QuickTurn™ GFKE-0201B-EN - 22 - GE Fanuc Automation S.A.
  • Page 23QuickTurn™ GFKE-0201B-EN - 23 - GE Fanuc Automation S.A.
  • Page 24QuickTurn™ GFKE-0201B-EN - 24 - GE Fanuc Automation S.A.
  • Page 25QuickTurn™ GFKE-0201B-EN - 25 - GE Fanuc Automation S.A.
  • Page 26QuickTurn™ GFKE-0201B-EN - 26 - GE Fanuc Automation S.A.
  • Page 27QuickTurn™ GFKE-0201B-EN - 27 - GE Fanuc Automation S.A.
  • Page 28QuickTurn™ 7 Input Signals Address Signal Description Remarks X8.0 Joy Stick + X 0: No Effect 1: Request to Move Axis X8.1 Joy Stick -X 0: No Effect 1: Request to Move Axis X8.2 Joy Stick +Z 0: No Effect 1: Request to Move Axis X8.3 Joy Stick -Z 0: No Effect 1: Request to Move Axis X8.4 Emergency St
  • Page 29QuickTurn™ X10.0 Override 1 X10 bit3 bit2 bit1 bit0 Rotary Switch 0 Æ 0000 Jog/Cycle=0% Rapid=10% (Parameter 1421) X10.1 Override 2 1 Æ 0001 Jog/Cycle=5% Rapid=10% (Parameter 1421) Rotary Switch 2 Æ 0010 Jog/Cycle=10% Rapid=10% (Parameter 1421) 3 Æ 0011 Jog/Cycle=20% Rapid=25% X10.2 Override 3 4 Æ 0
  • Page 30QuickTurn™ 8 Special Keep Relays K0.0 Reference Return Completed Check Bypass 0: Reference Done Checked For Cycle Start 1: Reference Done Not Checked K0.1 Machine Door Closed/Open Switch Bypass 0: Door Switch Checked For Spindle Running 1: Door Switch Not Checked K0.2 Thermic Motor Relay Bypass 0: R
  • Page 31QuickTurn™ 9 Output Signals Address Signal Description Remarks Y0.0 Lubrication Device 0: No Effect 1: Lubrication Device Running Y0.1 Spindle Running CW 0: No Effect (Message if Cycle Start Pressed + Cycle Start Blocked) 1: Spindle Running CW Y0.2 Spindle Running CCW 0: No Effect (Message if Cycle
  • Page 32QuickTurn™ 10 QuickTurn Application Wiring RS232C for DNC Mode and Data I/O JD5A RS232C for Quick Panel Connection JD5B LX660-4024-T030/ 24 VDC Analog Spindle JA40 Spindle Position Coder JA7A Power Supply 24 V CP1 LX660-8024-T010/ I/O Link Cable JD1A LX660-2007-T010/L*R003 Quick Panel Touch Screen S
  • Page 33QuickTurn™ 11 Quickpanel 0i Mate TB Connection Cable Quickpanel CNC SIO (25-Pin) JD5B RS232C(CH.2) GFKE-0201B-EN - 33 - GE Fanuc Automation S.A.
  • Page 34QuickTurn™ 12 Analog Spindle Interface Cable Connection GFKE-0201B-EN - 34 - GE Fanuc Automation S.A.
  • Page 35QuickTurn™ 13 Position Coder Interface GFKE-0201B-EN - 35 - GE Fanuc Automation S.A.
  • Page 36QuickTurn™ 14 Connector Location Beta SVM1-20i GFKE-0201B-EN - 36 - GE Fanuc Automation S.A.
  • Page 37QuickTurn™ 15 Connection Diagram BETA SVM1-20i GFKE-0201B-EN - 37 - GE Fanuc Automation S.A.
  • Page 38QuickTurn™ GFKE-0201B-EN - 38 - GE Fanuc Automation S.A.