(1) The following series of CNC software support the servo control card for the servo software 90Bx.
If your order contains the following series of CNC software, it is not necessary to change the
CNC software.
FS16i/160i/160is-MA : B0F2 / B0FB / B0F4
FS18i/180i/180is-MA : BDF2 / BDFB / BDF4
FS21i/210i/210is-MA : DDF2 / DDFB / DDF4
FS16i/160i/160is-TA : B1F2 / B1FB / B1F4
FS18i/180i/180is-TA : BEF2 / BEFB / BEF4
FS21i/210i/210is-TA : DEF2 / DEFB / DEF4
FS16i/160i/160is-PA : B7F2
FS18i/180i/180is-PA : B7F6
FS16i/160i/160is-LA : B8F3 / B8F4
FS16i/160i/160is-LPA : B8F6
(2) The following series of CNC software do not support the servo control card for the servo
software 90Bx. Please change to the suitable series of CNC software according to the following
table. There is a possibility that an option assembly is changed by this action. Because there
is a possibility that a new hardware (memory) is required. But this case is very rare. When
the option assembly is wrong, ROM parity alarm is occurred.
FS16i/160i/160is-MA : B0F1 / B0FA → change to the B0FB
FS18i/180i/180is-MA : BDF1 / BDFA → change to the BDFB
FS21i/210i/210is-MA : DDF1 / DDFA → change to the DDFB
FS16i/160i/160is-TA : B1F1 / B1FA → change to the B1FB
FS18i/180i/180is-TA : BEF1 / BEFA → change to the BEFB
FS21i/210i/210is-TA : DEF1 / DEFA → change to the DEFB
FS16i/160i/160is-PA : B7F1 → change to the B7F2
FS18i/180i/180is-PA : B7F5 → change to the B7F6
FS16i/160i/160is-LA : B8F1 → change to the B8F3
FS16i/160i/160is-LPA : B8F5 → change to the B8F6
(3) The following CNC software for compound machining function does not support the servo
control card for the servo software 90Bx. We are now modifying to support the servo control
card for the servo software 90Bx, and the supported edition will be informed in near future.
FS16i/160i/160is-TA : B1F3 / B0F3
FS18i/180i/180is-TA : BEF3 / BDF3
Edit.
DATE Design
Description
DRAW. NO.
A-80540EN
CUST.
TITLE
SHEET
2 / 2