Ed. Date Design Description
Date Jan.07.’04 Design. Apprv.
FANUC Series 30i-MODEL A
Linear scale with distance-coded
On the linear scale with distance-coded reference marks (serial ), the amount
of movement on FL-speed during establishment of reference point is set.
If the reference point is not established despite the amount of FL-speed
movement exceeds this parameter, alarm DS0017(SERIAL DCL:REF-POS
ESTABLISH ERR) occurs.
When this parameter is set to '0', the setting of allowable move amount of FL
feedrate on establishment of reference point (linear scale with
distance-coded reference marks (serial)) is ineffective.
1. On reference point establishment of manual feed
axis for simple synchronous control, if you set this
parameter on either master or slave axis, it become
effective on both master and slave axes
2. On angular axis control, this parameter setting of
perpendicular axis is ignored during the reference
position establishment of the angular axis.