
B–63173EN/03
8. CONNECTION TO SETTING AND DISPLAY UNIT
247
7 For details concerning cable J47 used to connect the stand–alone type
MDI to the mode selection switch, see Subsection 8.1.4.
8 Video cable J53 and stand–alone type CRT power cable J56 are not
supplied with the unit.
9 Always connect the protective ground plates of the stand–alone type
CRT and stand–alone type MDI to ground, see Section 5.8
10 All interfaces not described here are the same as those of the
CRT/MDI.
WARNING
To have the stand–alone type CRT approved for the CE
marking, it is necessary to provide a shock hazard
prevention cover (A02B–0200–K820). Attaching the cover
to the CRT is the machine tool builder’s responsibility.