Notes
・Condition that the soft key [GUIDANCE] is display
The condition for displaying the soft key [GUIDANCE] on a program
editing screen is as follows:
1. Foreground editing screen
・The CNC mode is EDIT, TJOG, or THND.
・Editing and display operations are not prohibited on the editing target
program
2. Background editing screen
・The editing target program is not opened in read only mode.
・Editing and display operations are not prohibited on the editing target
program.
3. MDI editing screen
・The CNC mode is MDI.
・Screen displayed when the soft key [GUIDANCE] is pressed
A guidance screen displayed by pressing the soft key [GUIDANCE] is
automatically determined according to the condition described below.
1. When the tilted working plane command is not included in a block of
cursor position on program editing screen.
The command type selection screen is displayed. A block created
on the guidance screen is inserted after the block of the cursor
position on the program editing screen.
2. When the tilted working plane command is included in a block of
cursor position on program editing screen.
The data setting screen is displayed, and the parameter of tilted
working plane command in the block of cursor position on program
editing screen are displayed. The block of cursor position on
program editing screen is replaced with a block created on the
guidance screen.
NOTE
・ If the CNC is in the reset state or emergency stop state
when the [GUIDANCE] soft key is pressed on the
foreground editing screen or the MDI editing screen,
continued operation is disabled with the warning
"PROGRAM READ FAILED". (Soft keys other than the
[CANCEL] soft key are not displayed.) Return to the
program editing screen by pressing the soft key [CANCEL]
then press the soft key [GUIDANCE] again.
A-90404 E
Title
Draw
No.
10/24
Sheet
FANUC Series 30
i
/ 31
i
/ 32
i
Guidance screen for
Tilted Woking Plane command
Edit
Apprv.
Desig.
Date
Design
Descri
tion
Date
Feb.02.2006