1.2 GUIDANCE SCREEN FOR TILTED WORKING PLANE
COMMAND
The guidance screen for tilted working plane commands (hereinafter referred
to as the guidance screen) consists of a command type selection screen and a
data setting screen. The command type selection screen is for selection of a
tilted working plane command. And the data setting screen is for specifying
tilted working plane according to the selected command type. By setting and
operation on these guidance screens, a tilted working plane command block
can be created.
A created block is newly inserted into the program being edited or is
eflected as a modification to an existing block.
r
Creation of a new block
The following shows the procedures to make the block of tilted working
plane command on guidance screen, and to insert the block to a program
eing edited on program editing screen.
b
1. Display a program which you want to insert a tilted working plane
command block on a program editing screen such as the foreground
diting screen, background editing screen, or MDI editing screen.
e
・Display screen ing the foreground editing
1. Select the EDIT mode.
2. Press the function key <PROG>.
3. Press the soft key [PROGRAM].
・Displaying the background editing screen
OG>.
1. Press the function key <PR
2. Press the soft key [LIST].
3. Move the cursor to a program to be edited in the background
ys.
with the cursor ke
4. Press <INPUT>.
・Display g in the MDI editing screen
1. Select the MDI mode.
2. Press the function key <PROG>.
3. Press the soft key [PROGRAM].
A-90404 E
Title
Draw
No.
4/24
Sheet
FANUC Series 30
i
/ 31
i
/ 32
i
Guidance screen for
Tilted Woking Plane command
Edit
Apprv.
Desig.
Date
Design
Descri
tion
Date
Feb.02.2006