A-79595E
Title
Draw
No.
Ed. Date Design Description
Date May.24.’04 esig. Apprv.
38/38
Sheet
FANUC Series 30i-MODEL A
Live Tool Control With Servo Motor
11065
Time constant for acceleration/deceleration deceleration after cutting feed
interpolation in rigid tapping extraction (first gear)
11066
Time constant for acceleration/deceleration deceleration after cutting feed
interpolation in rigid tapping extraction (second gear)
11067
Time constant for acceleration/deceleration deceleration after cutting feed
interpolation in rigid tapping extraction (third gear)
Time constant for acceleration/deceleration deceleration after cutting feed
interpolation in rigid tapping extraction (fourth gear)
11068
[Input type] Parameter input
[Data type] Word axis
[Unit of data] msec
[Valid data range] 0 to 4000
When bit 2 (TDR) of parameter No. 5201 is set to 1, time constants
for extraction of rigid tapping with servo motor can be set in these
parameters (Nos. 11065 to 11068).
Set these parameters with a live tool axis in rigid tapping.