
SAFETY PRECAUTIONS B-65272EN/04
s-4
WARNING
- Do not bring any dangerous stuff near a motor.
Motors are connected to a power line, and may get hot. If a flammable
is placed near a motor, it may be ignited, catch fire, or explode.
- Do not get close to a rotary section of a motor when it is rotating.
You may get your clothes or fingers caught in a rotary section, and
may be injured. Before starting a motor, ensure that there is no stuff
that can fly away (such as a key) on the motor.
- Do not touch a motor with a wet hand.
A failure to observe this caution is vary dangerous because you may
get electric shocks.
- Before touching a motor, shut off the power to it.
Even if a motor is not rotating, there may be a voltage across the
terminals of the motor.
Especially before touching a power supply connection, take sufficient
precautions.
Otherwise you may get electric shocks.
- Do not touch any terminal of a motor for a while (at least 5 minutes) after the
power to the motor is shut off.
High voltage remains across power line terminals of a motor for a
while after the power to the motor is shut off. So, do not touch any
terminal or connect it to any other equipment. Otherwise, you may get
electric shocks or the motor and/or equipment may get damaged.
- To drive a motor, use a specified amplifier and parameters.
An incorrect combination of a motor, amplifier, and parameters may
cause the motor to behave unexpectedly. This is dangerous, and the
motor may get damaged.
- Before driving a motor, be sure to secure it.
If a motor is drove without being secured, it may roll over during
acceleration or deceleration, injuring the user.