
1. LIST OF FUNCTIONS
B–64153EN/01
4
No.
Whether
supported
Item
6.2 Linear interpolation ∆: See chapter 2
6.3 Circular interpolation ∆: See chapter 2
6.4 Thread cutting ×
6.5 Single direction positioning ×
6.6 Helical interpolation f
6.7 Polar coordinate interpolation ×
6.8 Cylindrical interpolation ×
6.9 Polygonal turning ×
6.10 Normal direction control ∆: See chapter 2
6.11 Linear interpolation G28,G30,G53 ×
7 Feedrate control/acceleration and
deceleration control
7.1 Feedrate control
Rapid traverse rate ∆: See chapter 2
Cutting feedrate clamp f
Feed per minute f
Feed per revolution/manual feed per
revolution
×
One–digit F code feed ×
Inverse time feed ×
Rapid traverse override ∆: See chapter 2
Feedrate override f
Override cancel f
Automatic corner override f
External deceleration f
Feed stop f
Feedrate clamping by arc radius f
Automatic corner deceleration f
Advanced preview control ∆: See chapter 2
AI contour control ×
AI advanced preview control ×
7.2 Acceleration/deceleration control
Automatic acceleration/deceleration f
Rapid traverse block overlap ×