
B-63454EN/01 4. OPERATION
-47-
4.7 SEND DATA
4.7.1 Send (Input)
The following data can be entered by choosing Send and Input.
(1) Parameter (4) Signal
(2) Offset (5) Message
(3) Macro variable
Supplement:
(2) Offset
In addition to an offset number, an offset type needs to be set. Set
an offset type as described below.
M series (machining center)
Tool radius Tool length
Wear 0 2
Figure 1 3
(Supplement) Set 0 when there is no tool radius/tool length
distinction and no wear/figure distinction.
T series (lathe)
X-axis Z-axis Tool nose
radius
Virtual
tool nose
Y-axis
Wear 0 2 4 6 8
Figure 1 3 5 7 9
(5) Message
With this function, a message entered through the host computer
can be displayed on the CNC screen. When a message is sent, the
CNC screen is automatically switched to the remote diagnosis
screen to display the sent message. Only alphanumeric characters
can be used.