
4. OPERATION B-63454EN/01
-48-
4.7.2 Send (File)
The data described below can be sent by choosing Send and then File.
(See also: Section 4.8.2)
(1) All parameters
(2) Program transmission
(3) Program check
NOTE
1 Before parameters can be entered or all parameters
can be sent, the CNC must be placed in the
emergency stop state.
2 Before programs can be sent or checked, the CNC
must be placed in edit mode.
3 For the Series 16i/18i/21i
If the file size of data to be sent or checked exceeds a
limit described below, the data cannot be sent or
checked. If a file exceeding a size described below is
sent, the remote diagnosis software and CNC will
hang.
Parameter: 1500 bytes
Program: 400 bytes