
PROGRAMMING14. COMPENSATION FUNCTION
B–63844EN/02
278
Tool compensation memory C can be used.
The tool compensation values are as following that are entered (set) (Table
14.6 (b)).
Table 14.6 (b) Setting contents tool compensation memory
and tool compensation value
Tool compensation value Tool compensation memory C
Tool geometry compensation value
for address D
set
Tool geometry compensation value
for address H
set
Tool wear compensation for value ad-
dress D
set
Tool wear compensation
value for address H
set
The programming format depends on which tool compensation value is
used.
Table 14.6 (c) Setting range of Tool compensation memory
and Tool compensation value
Tool compensation value Format
Geometry compensation value for H code G10L10P_R_;
Geometry compensation value for D code G10L12P_R_;
C
Wear compensation value for H code G10L11P_R_;
Wear compensation value for D code G10L13P_R_;
P : Number of tool compensation
R : Tool compensation value in the absolute command(G90) mode
Value to be added to the specified tool compensation value in the
incremental command(G91) mode (the sum is also a tool
compensation value.)
NOTE
To provide compatibility with the format of older CNC
programs, the system allows L1 to be specified instead of
L11.
D Tool compensation
memory and the tool
compensation value to
be entered
Format
D Input of tool
compensation value by
programing