B–63010EN/02
4. DESCRIPTION OF PARAMETERS
303
5611
Radius of curvature at cutting point for starting basic circle neighborhood override 1
5612
Radius of curvature at cutting point for starting basic circle neighborhood override 2
5613
Radius of curvature at cutting point for starting basic circle neighborhood override 3
5614
Radius of curvature at cutting point for starting basic circle neighborhood override 4
5615
Radius of curvature at cutting point for starting basic circle neighborhood override 5
[Data type] 2–word
[Unit of data]
Increment system IS–B IS–C Units
Metric input 0.001 0.0001 mm
Inch input 0.0001 0.00001 inch
[Valid data range] 1 to 99999999
The settings of these parameters are used for automatic speed control
during involute interpolation.
5616
Override value for starting basic circle neighborhood override 2
5617
Override value for starting basic circle neighborhood override 3
5618
Override value for starting basic circle neighborhood override 4
5619
Override value for starting basic circle neighborhood override 5
[Data type] Byte
[Unit of data] %
[Valid data range] 1 to 100
The settings of these parameters are used for automatic speed control
during involute interpolation.
5620
Lower override limit during involute interpolation
[Data type] Byte
[Unit of data] %
[Valid data range] 1 to 100
The setting of this parameter is used for automatic speed control during
involute interpolation.