4. DESCRIPTION OF PARAMETERS
B–63010EN/02
52
1244 Coodinates of the floating reference positon for each axis
[Data type] 2–word axis
[Unit of data]
Increment system IS–A IS–B IS–C Unit
Millimeter machine 0.01 0.001 0.0001
mm
Inch input 0.001 0.0001 0.00001 inch
Rotation axis 0.01 0.001 0.0001
deg
[Valid data range] –99999999 to 99999999
This parameter specifies the coordinates of the floating reference position
for each axis. The parameter is automatically set when the floating
reference position is specified using soft keys on the current position
display screen.
1250
Coordinate value of the reference position used when automatic coordinate sys-
tem setting is performed
[Data type] 2–word axis
[Unit of data]
Input increment IS–A IS–B IS–C Unit
Linear axis (input in mm) 0.01 0.001 0.0001 mm
Linear axis (input in inches) 0.001 0.0001 0.00001 inch
Rotation axis 0.01 0.001 0.0001 deg
[Valid data range] –99999999 to 99999999
Set the coordinate value of the reference position on each axis to be used
for setting a coordinate system automatically.
1251
Coordinate value of the reference position on each axis used for setting a coordi-
nate system automatically when input is performed in inches
[Data type] 2–word axis
[Unit of data]
Incerment system IS–A IS–B IS–C Unit
Linear axis (input in inches) 0.001 0.0001 0.00001 inch
[Valid data range] –99999999 to 99999999
Set the coordinate value of the reference position on each axis to be used
for setting a coordinate system automatically when input is performed in
inches.
NOTE
This parameter is valid when ZPI in parameter 1201 is set to
1.