
OPERATION
5. TEST OPERATION
B–62094E/04
266
To display the change in the position without moving the tool, use
machine lock.
All–axis machine lock, which stops the movement along all axes. In
addition, auxiliary function lock, which disables M, S, and T commands,
is available for checking a program together with machine lock.
CRT/MDI
X
Y
The tool does not move but the
position along each axis changes
on the display.
Tool
Workpiece
Fig. 5.1 Machine lock
Procedure for Machine Lock and Auxiliary Function Lock
Refer to the appropriate manual provided by the machine tool builder for
machine lock.
Press the auxiliary function lock switch on the operator’s panel. M, S, and
T codes are disabled and not executed. Refer to the appropriate manual
provided by the machine tool builder for auxiliary function lock.
M, S, and T commands are executed in the machine lock state.
When a G27, G28, or G30 command is issued in the machine lock state,
the command is accepted but the tool does not move to the reference
position and the reference position return LED does not go on.
M00, M01, M02, M30, M98, and M99 commands are executed even in
the auxiliary function lock state.
5.1
MACHINE LOCK AND
AUXILIARY
FUNCTION LOCK
D Machine Lock
D Auxiliary Function Lock
Restrictions
D M command by only
machine lock
D Reference position
return under machine
lock
D