A-79619E
Title
Draw
No.
Ed. Date Design Description
Date Sep.10.’04 Design. Apprv.
37/53
page
FANUC Series 30i/31i-MODEL A
Rotation Area Interference Check
10903 Maximum point of rectangle 1 of group D in the first axis
10904 Minimum point of rectangle 1 of group D in the first axis
[Input type] Parameter input
[Data type] Real
[Unit of data] mm, inch(machine unit
[Minimum unit of data] Depend on the increment system of the reference axis in the first path
[Valid data range] 9 digit of minimum unit of data(refer to standard parameter setting table(A))
(When the increment system is IS-B, -999999.999 to +999999.999)
These parameters set the maximum point and minimum point of rectangle
area 1 of group D in the first axis.
The set plane is specified with group-A movement axes 1 and 2. Set the
distances from the machine zero point to the maximum and minimum points.
Be sure to set a radius value regardless of whether the axis command is a
diameter- or radius-programmed command.
If there is no relevant rectangle area, set 0.
10905 Maximum point of rectangle 1 of group D in the second axis
10906 Minimum point of rectangle 1 of group D in the second axis
[Input type] Parameter input
[Data type] Real
[Unit of data] mm, inch(machine unit
[Minimum unit of data] Depend on the increment system of the reference axis in the first path
[Valid data range] 9 digit of minimum unit of data(refer to standard parameter setting table(A))
(When the increment system is IS-B, -999999.999 to +999999.999)
These parameters set the maximum point and minimum point of rectangle
area 1 of group D in the first axis.
The set plane is specified with group-A movement axes 1 and 2. Set the
distances from the machine zero point to the maximum and minimum points.
Be sure to set a radius value regardless of whether the axis command is a
diameter- or radius-programmed command.
If there is no relevant rectangle area, set 0.