Manual Guide M Facing
GE Fanuc Automation S.A. - 70 -
GFKE-0046-EN/01
5
FACING
Two Facing cycles are available for operations with
Face Milling tools.
Selection by Soft-Key
To select one of the 'Facing Cycle', Soft-Key's can be
used. Please see Soft-Key structure on side.
In Facing Square and in Facing Circle there are
different milling strategies and 'Ring Facing' in
Detailed menu screen available, like
SQUARE UNI-DIRECTIONAL
BI-DIRECTIONAL
RING FACING
CIRCLE UNI-DIRECTIONAL
BI-DIRECTIONAL
RING FACING
There are several Cycles available for frequently
needed machining operations.
Important note:
As to the detailed specifications, such as the restriction,
refer to the Operator's Manual describing the CNC of the
FANUC Series 16/18/21i -MA