B-65382EN/02 CONFIGURATIONS AND SELECTION 3.LINEAR MOTOR SELECTION FORM
- 111 -
3 LINEAR MOTOR SELECTION FORM
For selecting a FANUC linear motor, fill in a "Linear Motor Selection
Form" shown on another page and submit the form to a FANUC sales
representative. FANUC experts on linear motors will consider an
appropriate motor in detail and FANUC can make give you
suggestions and advice at your request.
How to use a "Linear Motor Selection Form"
<1> Make a copy of "Linear Motor Selection Form" shown on
another page and enter the linear motor selection conditions in
the copy without omission. Entering a permissible range as a
selection condition is very useful for consideration by FANUC.
<2> Submit the entered "Linear Motor Selection Form" to a FANUC
sales representative.
<3> FANUC experts on linear motors select an appropriate motor by
detailed consideration, then the FANUC sales representative
informs you of the selection result.
NOTE
1 If there is an omission in the Linear Motor Selection
Form, an appropriate motor may not be able to be
selected. Be sure to fill in the form without omission.
2 Motor selection at FANUC needs 1 to 2 weeks in
ordinary cases. If you are in a rush, write your
request in the selection form or make it known to the
sales representative.
Explanation of terms in the "Linear Motor Selection Form"
- Direction of travel
If the axis is slanted, enter the angle from a horizontal line.
- Weight of movable objects
Enter the maximum weight of all movable objects (table, tool
post, workpiece, and so on), excluding the motor.
- Type of counterbalance on a vertical axis
Enter whether to use a counterbalance on a vertical axis. When
using a counterbalance on a vertical axis, also enter its type and
weight (or force applied to it).
- Table support (sliding, rolling, and static pressure)
Enter the type of sliding surface. Also enter a special material for
the sliding surface if used.