3.ASSEMBLY HANDLING, DESIGN, AND ASSEMBLY B-65382EN/02
- 166 -
3.1 LINEAR MOTOR MOUNTING PROCEDURES
This section introduces four procedures for mounting a linear motor
on the machine. Depending on the structure of the machine, select the
safest procedure.
3.1.1 Procedure #1 for Mounting a Linear Motor on the Machine
If the total length of magnet plates for one axis is greater than the total
length of a coil slider by a factor of 2 or more, the linear motor can be
mounted using the procedure below.
<1> Shift the movable table to one end of the axis, then secure a
magnet plate (half of the total length).
Linear guide
Securing screws
Magnet plate
Movable table
<2> Shift the movable table onto the magnet plate. Note that if the
table is magnetic, the table may be attracted toward the magnet
plate. Place a spacer as thick as the magnet plate in the area
where no magnet plate is mounted, then place a coil slider on the
spacer.
Coil slider
Spacer
<3> Shift the movable table onto the coil slider, then secure the coil
slider with screws.