
3.1 Backup Method with Host PC over Ethernet Network
• Client-side:
12.1” Panel i Industrial PC (A13B-0193-B042), Pentium III, 500Mhz, 128 MB RAM
Windows 2000 Professional, English
3com Ethernet Card 10/100 XL PCI, GE Fanuc Ordering Code: LX08B-3C905C-TX-M
Floppy Drive Unit from the market
Note: Alternatively the Floppy Unit provided by FANUC / GE Fanuc can be used:
- Floppy Disk Unit: A02B-0207-C008
- Cable Set: A02B-0207-K801
15” Panel i for Automotive (A13B-0196-B412, Pentium III, 866MHz, 512MB RAM
Windows 2000/XP Professional, English
FDD/CD-ROM Drive Unit A08B-0084-J020
• Server-side:
Dell Desktop PC Intel Pentium 4, 1.7GHz, 512MB RDRAM Memory, 80GB HDD
with Ethernet Card from the market (type unknown).
Alternatively: Dell Laptop Latitude C600 Intel Pentium III, 600MHz, 256MB-RAM, 10GB
HDD with embedded Ethernet Port (type unknown).
• Operating System: B indows 2000 Prof with Service Pack II.
During Backup/Restore-Procedure, the Client-Computer is running PC-DOS with
appropriate Network driver for the 3COM Ethernet Card respectively INTEL Pro 100 driver
for Embedded Ethernet (Panel i for Automotive).
Link: Ethernet Cross-over cable from the market (RJ45 connector on both sides)
Figure 26: Pin-Layout of Ethernet Cross-over cable 100TX
3.1.1 Tested Configurations
oth sides are running W
• Cable
File Name: Backup_Guidance_EN21.doc
Created by: Olaf Sklepik on 20-Apr-05
Approved by: n/a
Page 35 of 72