
B–63443EN/02
6. MODE SELECTIONPMC INTERFACE
139
The mode select signal is a code signal consisting of the three bits MD1,
MD2, and MD4. The five modes -- memory edit (EDIT), memory
operation (MEM), manual data input (MDI), manual handle/incremental
feed (HANDLE/INC), manual continuous feed (JOG), -- can be selected.
And in addition, DNC operation mode can be selected by combining the
(MEM) mode setting and the DNCI signal. Manual reference position
return mode can be selected by combining the manual continuous feed
(JOG) mode setting and the ZRN signal.
The currently selected operation mode can be posted by outputting the
operation mode check signal.
General