
B–63522EN/02
14. TOOL COMPENSATION FUNCTION
NC FUNCTION
205
NOTE
1 The range enclosed in parentheses applies when automatic
inch/metric conversion is enabled.
2 The option enabling seven–digit tool offset specification
cannot be used for B–axis offsets for B–axis control.
No distinction is made between the memory for geometry compensation
values and that for wear compensation values. The total of the geometry
compensation value and wear compensation value for a tool is stored in
compensation memory.
Example
Offset
number
X axis
offset
amount
Z axis
offset
amount
Y axis
offset
amount
Amount of
tool nose
compensation
Imaginary
tool nose
number
01 10.0 100.1 0 0.5 3
02 20.2 150.3 0 0.7 2
03 30.4 200.5 0 1.0 8
Memory for geometry offset and tool wear offset is prepared separately.
Geometry offset and tool wear offset can thus be set separately.
Z axis wear offset
Z axis geometry offset
X axis geometry offset
X axis wear offset
Offset
number
X axis offset
value
Z axis offset
value
Y axis offset
value
Tool nose radius
compensation
value
Imaginary
tool nose
number
Geometry
offset
Wear
offset
Geometry
offset
Wear
offset
Geometry
offset
Wear
offset
Geometry
offset
Wear
offset
01 10.0 0.0 100.0 0.1 0 0 0.4 0.1 3
02 20.2 0.2 150.0 0.3 0 0 0.5 0.2 2
03 30.4 0.4 200.0 0.5 0 0 1.2 –0.2 8
D Tool geometry/wear
compensation option not
specified
D Tool geometry/wear
compensation option
specified