
B–63522EN/02
27. DISPLAYING AND SETTING DATA
NC FUNCTION
373
The periodic maintenance screen shows the current statuses of those
consumables that require periodic replacement (backup battery, LCD
backlight, touch pad, etc.). An item whose service life has expired is
indicated by the machine run time or the like.
PERIODICAL MAINTENANCE O0001 N12345
(STATUS)
ITEM NAME REMAIN
: 01 BATTERY FOR CONTROLLER 0H
@ 02 BATTERY FOR PULSECODER 5000H
03 LCD BACK LIGHT 10000H
@ 04 COOLANT 720H
05
06
07
08
09
10
>_
EDIT **** *** *** 19:27:05
[ ][MAINTE ][ ][ ][(OPRT) ]
A pen input device/touch pad, manufactured by Fujitsu Limited, is used
on the LCD display as follows:
(1)The soft keys below the 10.4–inch color LCD/MDI panel (F0 to F9,
FR, and FL) are replaced by the soft keys on the touch panel.
(2)The cursor displayed on the 10.4–inch color LCD is controlled from
the touch panel.
(3)A touch–panel–type software machine operator’s panel, realized by C
executor, can be used.
(4)A touch–panel–type calculator, realized by C executor, can be used.
(5)A C executor application program can be created by using the touch
panel.
When this interface is supported, an external touch panel supporting the
SNP–X protocol can be attached to the FANUC Series 16i/18i/21i
(described just as the FS16 hereinafter).
With the external touch panel which has functions equivalent to the
machine operator’s panel, the PMC–controlled signals (input signals (X),
output signals (Y), internal relays (R), keep relays (K), data tables (D),
timers (T), and counters (C)) can be read and written.
The external touch panel features a plotting capability. The user can
perform plotting and address (signal) assignment freely. For example,
when a screen to which data table settings are assigned is created, data in
the data table can be set using switches on the screen.
27.18
PERIODIC
MAINTENANCE
SCREEN
27.19
TOUCH PANEL
27.20
EXTERNAL TOUCH
PANEL INTERFACE