
B–63522EN/02
3. INTERPOLATION FUNCTIONS
NC FUNCTION
63
Either of two types of machining can be selected, depending on the
program command.
D For those portions where the accuracy of the figure is critical, such as
at corners, machining is performed exactly as specified by the program
command.
D For those portions having a large radius of curvature where a smooth
figure must becreated, points along the machining path are
interpolated with a smooth curve, calculated from the polygonal lines
specified with the program command (smooth interpolation).
In smooth interpolation mode, the CNC automatically determines,
according to the program command, whether an accurate figure is
required, such as at corners, or a smooth figure is required where the
radius of curvature is large. If a block specifies a travel distance or
direction which differs greatly from that in the preceding block, smooth
interpolation is not performed for that block. Linear interpolation is
performed exactly as specified by the program command. Programming
is thus very simple.
Interpolated by smooth curve
Interpolated by smooth curve
N17
N16
N1
N2
N15
N14
N13
N12
N11
N10
N9
N3
N4
N5
N6
N7
N8
Linear interpolation
Linear interpolation
N17
N16
N1
N2
N15
N14
N13
N12
N11
N10
N9
N3
N4
N5
N6
N7
N8
Smooth interpolation can be specified in high–speed contour control
mode (between G05 P10000 and G05 P0). For details of high–speed
contour control, see Section 20.6.
Starting of smooth interpolation mode
G05.1 Q2X0Y0Z0;
Cancelation of smooth interpolation mode
G05.1 Q0;
3.12
SMOOTH
INTERPOLATION
(G05.1) (M series)
M series
Examples
Format