
B-63172EN/01-2
2/4EDIT
DATE DESIG. DESCRIPTION
FANUC Power Mate – i MODEL D/ H
DESCRIPTION MANUAL
THE FUNCTION OF INCREMENT SYSTEM IS-C
TITLE
DRAW.NO. CUST.
SHEET
01
000530 New design
Item specification iD iD2 iH
Increment system 1/10 0.0001mm 0.0001deg 0.00001inch 0 0
☆
☆☆
☆
Least command increment Rapid traverse rate range
0.01mm,deg 30~240000mm/min,deg/min
0.001mm,deg 30~240000mm/min,deg/min
0.0001mm,deg 30~100000mm/min,deg/min
0.001inch 3.0~9600.0inch/min
0.0001inch 3.0~9600.0inch/min
0.00001inch 3.0~4000.0inch/min
Least command increment Cutting feed rate range
0.01mm,deg 1~240000mm/min,deg/min
0.001mm,deg 1~240000mm/min,deg/min
0.0001mm,deg 1~100000mm/min,deg/min
0.001inch 0.01~9600.0inch/min
0.0001inch 0.01~9600.0inch/min
0.00001inch 0.01~4000.0inch/min
Change the description of " increment system 1/10 " in the chapter " 2 LIST OF SPECIFICATION "
Replace the description of " NOTE" in the chapter " 1.3 INCREMENT SYSTEM" as follows.
NOTE
IS-A is available only for Power Mate i - H
Replace the description of " Table" in the chapter " 4.1 RAPID TRAVERSE" as follows.
Replace the description of " Table" in the chapter " 4.2.3 Per Minute Feed(G94)" as follows.