
B–66102E/10
2. EQUIPMENT CONFIGURATION
5
2
EQUIPMENT CONFIGURATION
(1) Personal computer: (Fujitsu: FMR Series)
(NEC : PC98 Series)
(IBM : PC-AT Series)
Main memory 640K bytes or more
OS (FMR/PC98)
(PC-AT)
MS-DOS Version 3.1 and later
PC-DOS Version 3.3 and later
Hard disk About 1M bytes is required for install the system
(Caution 1)
Floppy disk drive 5-inch floppy disk drive (2HD) 3.5-inch floppy disk
drive (2HD) for 15i/16i/18i/21i (Caution 2)
Serial interface RS-232-C serial interface
Miscellaneous
(Option)
Printer (Note 1)
GP-IB interface (Note 2)
(2) FANUC PMC-Writer or FANUC FA-Writer
Serial interface (RS-232-C)
GP-IB interface (option/FANUC FA-Writer only)
CAUTION
1 The macro compiler utility software is installed on hard disk.
This software occupies a hard disk space of about 1M bytes.
In addition, developed macro programs and list files/object
files generated at compile time are output as files on hard
disk. So the size of hard disk depends on the macro
programs developed.
2 The macro compiler utility software is distributed with a
5-inch (2HD) or 3.5-inch (2HD) floppy disk for series
15i/16i/18i/21i floppy disk. The macro executor is also
distributed with a 5-inch (2HD) or 3.5-inch (2HD) floppy disk
for series 15i/16i/18i/21i floppy disk. A 5-inch or 3.5-inch
floppy disk drive is needed to install the system and
executor files.
NOTE
1 The macro compiler and macro linker output a reference list,
compile list, and link list as MS-DOS text files to hard disk.
For output to the printer, use an MS-DOS/PC-DOS
command.
Text files are output in a format assuming an 80-character,
60-line printer.
2 The FANUC FA-Writer allows high-speed writing to
ROM/verification based on the GP-IB interface. (Note that
only NEC PC98 Series and IBM PC-AT Sereis currently
supports this function.)