
I. P–CODE LOADER FUNCTION
(FOR Series 16–B/C, 18–B/C,
21–TA, Series 16i/18i/21i–A/B)
B–66102E/10
APPENDIX
144
The P-CODE loader function transfers ROM-format files created by a
personal computer (PC) macro compiler into RAM of CNC. The function
also supports writing to flash ROM (exclude of Series 21–TA).
The CNC is connected to the PC via the RS-232C interface.
The communication parameters for transferring a ROM-format file
(loading) depend on the parameters specified for the CNC. The
parameters must be specified prior to loading.
When the CNC is turned off then back on by simultaneously pressing the
CAN
and
PROG
MDI keys, this function displays the specialized data
transfer screen (loading screen). If Series 16/18–B/C having two–path
control is used, the loading screen is displayed after tool post 1 or 2 is
selected from the tool post selection screen. Data can be transferred only
when the loading screen is displayed.
Specify data transfer from the PC. For details of the transfer command,
see Section 4.3.
While this function is being executed, the CNC power-on sequence is
halted. While the specialized data transfer screen or loading screen is
displayed, the CNC is disabled. This function requires the executor
function and reader/punch control function.
I.1
OUTLINE