
B–66102E/10
N. Super CAP T/Super CAP II T
LOADING TO FLASH ROM
APPENDIX
213
Before the system installation, please install a memory card adapter in
your personal computer.
(1) Installing the FAPT MACRO Compiler System Software
Install the the FAPT MACRO compiler system software as follows.
1. Insert the disk marked FAPT MACRO COMPILER SYSTEM
v3.1 into the appropriate disk drive.
2. Enter the following command and follow the on–screen
instructions:
?: MSETUP <in> <out> (example: B:\MSETUP B: C: )
?: :The root directory of disk drive.
<in> :Specify the name of the disk drive.
<out> :Specify the drive name of the hard disk to install the software.
The following directories are created once the installation is
complete.
\MCOMP \TOOL \TOOL:
\MEX
\USR \SAMPLE \MEX : Executor directory
\USR : User directory
The FAPT MACRO Compiler sys-
tem software, batch document
files,and so forth are stored.
This specification assumes as follows.
B drive : 5 inch floppy disk
C drive : hard disk
(2) Path Setting
Installed software tools are in \MCOMP\TOOL directory. So modify
your ”AUTOEXEC.BAT” file to contain the following DOS
command entry.
example)
PATH=C:\MCOMP\TOOL
(3) Installing the Macro Executor File
Copy the macro executor file from the disk marked MACRO
LIBRAY (16TB SCAP) 1/3 to 3/3
*In explanation, ”BH0F” is the series and ”_01” is version for
example.
Executor files consists of three files,
BH0F_01. EX1
BH0F_01. EX2
BH0F_01. EX3
COPY B:BH0F_01. EX1 C:\MCOMP\MEX
COPY B:BH0F_01. EX2 C:\MCOMP\MEX
COPY B:BH0F_01. EX3 C:\MCOMP\MEX
(4) Installing the Macro Source File.
Copy the macro source file from the disk maked MACRO LIBRAY.
COPY B:*.SRC C:\MCOMP\USR *.SRC: Macro source file
N.1
SYSTEM
INSTALLATION
(SETUP)