B–63835EN/03
1. DISPLAY AND OPERATION
83
(3) Automatic operation status
MTN: Program–specified axis movement is under way.
DWL: Program–specified dwell command (G04) is being executed.
***: Other status
(4) Auxiliary function status
FIN: The completion signal FIN for an auxiliary function is being
awaited.
***: Other status
(5) Emergency stop and reset status (displayed at the location of items
mentioned in (3) and (4))
––EMG–– : Emergency stop status
–RESET–: CNC reset status (The state in which the reset signal or
the MDI RESET key remains active.)
(6) Alarm status
ALM : An alarm condition has been detected.
BAT : The lithium battery (CNC back–up battery) voltage is low
(the battery is to be replaced).
Blank: Other status
(7) Clock display: Hour:minute:second
(8) Program editing/running status
Input: Data is being input.
Output: Data is being output.
SRCH: A data search is under way.
EDIT: Editing such as insertion or modification is under way.
LSK: Label skip enabled at data input (until valid information
is read).
AIAPC: AI advanced preview control mode
Blank: Editing is not under way.