1. DISPLAY AND OPERATION
B–63835EN/03
46
(1)On the operation history signal selection screen, press the [(OPE)] soft
key.
OP_HIS SIGNAL SELECT O1000 N02000
No. ADDRES SIGNAL No. ADDRES SIGNAL
01 G0004 00000010 11 ********
02 ******** 12 ********
03 ******** 13 ********
04 ******** 14 ********
05 ******** 15 ********
06 ******** 16 ********
07 ******** 17 ********
08 ******** 18 ********
09 ******** 19 ********
10 ******** 20 ********
>
EDIT **** *** *** *** 00:00:00
[ ALLDEL ][ DELETE ][ ON:1 ][ OFF:0 ][ ]
(2)Press the cursor key or to position the cursor to a desired
position.
(3)Key in a signal type (X, G, F, or Y) and an address, then press the
INPUT
key.
Example) G0004
INPUT
Signal address G0004 is set in the ADDRES column. The corresponding
position in the SIGNAL column is initialized to 000000000.
(4)Select the bit to be recorded.
To select all bits of the specified signal address, press the [ON:1] soft
key while the cursor is positioned to
00000000 .
To select a particular bit, position the cursor to that bit by pressing the
cursor key
or , then press the [ON:1] soft key. To cancel
a selection made by pressing the [ON:1] soft key or to cancel a
previously selected signal, press the [OFF:0] soft key.
(5)Up to 20 addresses can be specified by means of this signal selection.
These addresses need not always be specified at consecutive positions,
starting from No.1.
(6)Pressing the [ALLDEL] and [EXEC] soft keys deletes all data. If the
[ALLDEL] key is pressed by mistake, it can be cancelled by pressing
the [CAN] key.
(7)To delete a selected signal address, position the cursor to the
corresponding position then press the [DELETE] and [EXEC] soft
keys. In the SIGNAL column, asterisks ******** are displayed in
place of the deleted data. In the ADDRES column, the corresponding
position is cleared.
If the [DELET] key is pressed by mistake, it can be cancelled by
pressing the [CAN] key.
(8)Pressing the return menu key [
] causes the [OPEHIS] (OPE) soft
key to be displayed again.
1.6.3
Setting the Input Signal
or Output Signal to be
Recorded in the
Operation History